EUTECH INSTRUMENTS ALPHA PH 500 - REV 5 Manual de instrucciones Pagina 19

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 40
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 18
- 15 -
9 SETUP MODE
9.1 General Information
IMPORTANT: When Setup mode is entered, the controller automatically goes into
a “HOLD” mode where the 4-20 mA output freezes and the relays are de-activated
(if it was in an activated condition). Upon return to the measurement mode, both
the 4-20mA output and relay activities resume, depending on the settings.
To enter setup mode:
1. Key in the password “022” using the method described in section 5.
2. Press the or keys to display the various sub-menus shown here.
3. When a sub-menu item is displayed, press the ENTER key to enter that sub-
menu.
4. Press and keys together (ESCAPE) to leave the Setup mode and
return to Measurement mode.
P1. 0
P3. 0
P4.0
P5.0
P6.0
P2
.0
Vista de pagina 18
1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 39 40

Comentarios a estos manuales

Sin comentarios