
Instruction Manual CON 6/TDS 6
20
5 MEASUREMENT
The CON 6/TDS 6 meter is capable of taking measurements with automatic or
manual temperature compensation.
5.1 With Automatic Temperature Compensation (ATC)
For ATC, make sure the phono jack of the probe (see Figure in Section 3.5) is
securely inserted.
The conductivity/TDS reading displayed will be compensated for according to
the normalization temperature (20 °C or 25 °C) selected. See Section 6.6 –
Normalization Temperature.
Comentarios a estos manuales