EUTECH INSTRUMENTS ECOSCAN TEMP JKT PORTABLE METER Manual de instrucciones descargar pdf (Pagina 13)

5. DISABLE AUTO POWER OFF FEATURE

By default this meter will auto power-off 17 minutes after last key operation. This is

to conserve battery power. The auto power-off feature can be disabled in situation

where longer periods of monitoring are desired.

NOTE: The meter switches back to auto power-off mode as soon as it is turned off.

Procedure:

1. With meter off, press down ON/OFF and MIN/▼ keys together.

2. Release ON/OFF key first and wait for 2 seconds before releasing

MIN/▼ key.

3. The meter goes through the power-up sequence before coming to

measurement mode.

4. The “LO” indicator will blink, indicating that the auto power-off feature is

disabled.

NOTE: When battery is low, the “LO” indicator

will blink faster at every 1 second. Otherwise,

it blinks every 2 seconds.

Once the meter is switched off and

subsequently switched on again, the auto

power-off feature will be enabled.

NOTE: Under default operation (when auto

power-off feature is enabled), the appearance

of “LO” indicator permanently on the display

means the battery power is low. Once a new

battery is installed, the “LO” indicator will

disappear

The "LO" indicator will blink, indicating that the auto

power-off feature is disabled

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Sin comentarios

EUTECH INSTRUMENTS ECOSCAN TEMP JKT PORTABLE METER Manual de instrucciones Pagina 13