EUTECH INSTRUMENTS WATERPROOF C401 COLORIMETER Manual de instrucciones Pagina 7

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 44
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 6
Introduction C401/301/201/102/101
4
1.3 Keys and Functions
The keypad has four keys: ON/OFF, MODE, ZERO and READ/ENTER.
Keys Functions
ON/OFF - Powers on and shuts off the meter. With the auto switch-off feature
the meter automatically shuts off 10 minutes after last key press.
MODE - Selects the test to be performed.
- Selects the calibration point in an incremental circular manner during
calibration.
ZERO - Blanks the instrument (sets the meter to zero) before chemical
reagent is added.
- Initiates the calibration mode when used with the ON/OFF key.
- Aborts the calibration process without saving.
- Exits the calibration mode.
READ /
ENTER
- Initiates the measurement of the sample after the chemical reagent
has been added.
- Confirms the test selection.
READ
ENTER
ZERO
MODE
OFF
ON
WATERPROOF
Figure 3: C401/301/201/102/101 Keypad
Vista de pagina 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 43 44

Comentarios a estos manuales

Sin comentarios