EUTECH INSTRUMENTS ALPHA PH1000 PHORP CONTROLLERTRANSMITTER Manual de usuario Pagina 19

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 20
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 18
Alpha CON 2000 Conductivity Alpha CON/TDS 200 Conductivity/TDS
This isolated output 4-20mA industrial transmitter is a
sturdy microprocessor-based instrument that measures
conductivity and temperature and transmits its output via
the 2-wire power supply loop. IP65 weather proof
housing. Symmetrical operation eliminates fluctuation in
readings due to noise. LCD has primary and secondary
display.1/4 DIN size offers flexibility to mount on all or in a
control panel. It has many user-friendly features all of
which are completely accessible through the water-
resistant membrane keypad. Other features include user-
customization through setup menu.
Alpha CON 500 Conductivity
These controllers offer
Eutechs most advanced
operating features in a rugged
1/2-DIN, NEMA 4X housing.
Wall-mount housing allows
the controller to be mounted
on walls or pipes. Also
available in a panel-mount
version. Seven ranges in a
single controller allows the
controller to be used in a wide variety of applications with
the maximum range of 1000 mS/cm. User-Customization
through Advanced Setup Menu offers flexibility in
matching the controller‘s functions to suit individual‘s
specific requirements. Accept 4- or 2-Cell Electrodes.
Proportional, or Proportional Integral (PI) Control—ideal
for most demanding precision process control
applications Backlit Display for use in low-light conditions.
Two Galvanically Isolated, Scaleable 0/4 to 20 mA
Outputs for conductivity and temperature.
These controllers offer on/off control in a 1/4-DIN,
panel-mount housing. Ten selectable conductivity
measurement ranges in one controller via its IP54 front
panel. High-level accuracy of ±1% full-scale can be
obtained with appropriate cells and correct temperature
coefficient. User-Customization through Advanced Setup
Menu offers flexibility in matching the controller‘s
functions to suit individual‘s specific requirements. Two-
Level Password Protection prevents unauthorized
tampering with settings. Two Galvanically Isolated,
Scaleable 0/4 to 20 mA Outputs. Wash Contact Relay
controls electrode cleaning systems for desired duration
and frequency. Adjustable Hysteresis (Dead Band)
prevents rapid contact switching near set point.
Alpha CON 1000 Conductivity
Conductivity Field Monitor
The monitor is lightweight and
designed to hang easily on
any flat surface like a wall,
glass tank, on a container,
almost anywhere. Ideal for
non-stop 24-hr monitoring.
Bright LED display ensures
reading can be seen even from
a distant.
Alpha Con 200/TDS 200
controller and transmitter
has up to 10 different
measurement ranges in a
single unit (software
selectable).Designed to 1/8
DIN size, installation is easy.14 segment alpha numeric 4-
digit LED display is bright, clear and easy to read, even at a
distance. Two Single Pole Double Throw (SPDT) relays
are provided for limit control operations. Peripheral
devices are protected by the 'Hysteresis' function, which
prevents relay chattering. Full scale 4-20mA galvanically
isolated current output is available for process control.
Alpha CON 560 Conductivity
IP65 weather proof
housing Push button
offset adjustment makes
calibration simple
T e m p e r a t u r e
Compensation is both
automatic and manual
LCD has primary and
secondary display for
s i m u l t a n e o u s
conductivity and temperature 1/4 DIN size offers
flexibility to mount on wall or in a control panel. Easy to
use controller functions. It has got ability to set a time
delay up to 2000 seconds, which eliminates unneeded
control, prevents false alarm and makes it ideal for plant
environments. Backlit display ensures easy reading even
in the dark. UV light protection minimizes adverse effect
of exposure to sunlight.
Conductivity | Eutech Instruments Controller/Transmitter
Page | 32
1/4 DIN size DO transmitter offers flexibility to mount on
all or in a control panel. It has many user-friendly features
all of which are completely accessible through the water-
resistant membrane keypad. Other features include user-
customization through setup menu. Advanced
diagnostics like “out of range” and “Hold” indicators help
in monitor and process control. Scalable 4/20 mA output
with 3.8 mA out-of-range indicator. ATC with PT 100 (2
or 3 wire system)/MTC.
Alpha DO 500 Dissolved Oxygen
These controllers offer on/off control in a 1/4-DIN,
panel-mount housing. This controller and transmitter is
able to accept two different probes; low-range, 0 to 10
ppm and general-range 0.5 to 40 ppm. Unit of
measurement is either in ppm, mg/I or % saturation.
Dissolved Oxygen measurements vary with the salinity
and the atmospheric pressure. Hence, DO controller
allows the input of salinity (in the mg/l or ppm modes) and
pressure (mm Hg or KPas) values and automatically
compensates the measured values.This controller has the
versatility of being operated as a limit or proportional
controller. For critical control, simply configure the
controller for proportional control and select the mode of
operation as Pulse Length or Pulse Frequency. The
proportional band as well as the time/frequency can be
configured independently. Each set point can be
programmed to operate as 'Hi' or 'Lo', independently
Alpha DO 1000 Dissolved Oxygen
Electrodes/Probes for pH/ORP/
Conductivity/TDS/Dissolved Oxygen
Controllers/ Transmitters
Water Treatment
Wastewater Treatment
Plating
Metal Finishing
Printing
Pulp & Paper
Pharmaceutical
Food & Beverage
Eutech controllers can be used in a
wide variety of industries and
applications
Dissolved Oxygen | Eutech Instruments Controller/Transmitter
Page | 33
Vista de pagina 18
1 2 ... 14 15 16 17 18 19 20

Comentarios a estos manuales

Sin comentarios