
Instruction Manual PD 300
12 SPECIFICATIONS
pH
Range
Resolution
Relative accuracy
-2.00 to 16.00 pH
0.01 pH
±0.01 pH
Dissolved Oxygen
Range
Resolution
Relative accuracy
0.00 – 20.00 mg/L or ppm
0.01 mg/L; 0.01 ppm
± 1.5% of Full Scale
% Saturation of
Oxygen
Range
Resolution
Relative accuracy
0.0 – 200.0 %
0.1 %
± 1.5% of Full Scale
Temperature
Range
Resolution °C
Resolution °F
Relative accuracy
-10.0 to 110.0 °C, (14.0 to 230°F)
0.1°C
0.1°F (14.0°F – 199.9°F) and 1°F(200°F to 230°F)
± 0.3°C (± 0.5°F)
Salinity Correction
Range
Resolution
Method
0.0 – 50.0 ppt
0.1 ppt
Automatic correction after manual input
Barometric
Pressure
Correction (mm Hg)
Range
Resolution
Method
500 to 1499 mm Hg or 66.6 to 199.9 kPA
1 mm Hg or 0.1 kPA
Automatic correction after manual input
DO Probe Galvanic with integral Temperature Sensor
Response Time 40 seconds to achieve 93% of the reading
No. of DO Calibration Points Single point at 100% in saturated air or air-saturated water
Temperature Compensation Automatic or manual from 0 to 100 °C
pH Calibration Up to 5 points (pH 1.68, 4.01, 7.00, 10.01 & 12.45)
pH Slope & Offset Display Yes
Operating Temperature Range 0 to 50 °C
HOLD function Yes
Auto-Off function 20 minutes after last key press
Averaging/Stability function Selectable
Display Customised Dual LCD
Back Lit Display Yes
Inputs BNC for pH, 6-pin military type for DO & Temperature
Power Requirements four 1.5 V AAA-sized batteries (included)
Battery Life > 100 hours continuous use
Dimensions Meter: 19L x 9.5W x 5.7H cm (7.5”x3.75”x2.25”)
Case: 23.3L x 21.6W x 7.0H cm (9.17”x8.5”x2.8”)
Probe: 17.3L x 3.2 Dia cm (6.81”x1.26”dia) , with 3-m cable
Shipping weight Meter: 0.92 kg (2.0 lbs)
Carrying case with meter: 2.2 kg (4.85 lbs)
62
Comentarios a estos manuales