EUTECH INSTRUMENTS DO 6 - REV 2 Manual de instrucciones Pagina 9

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 20
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 8
Instruction Manual Temp 4/5/6
9
2.7 Switching the Meter On
1. Press ON/OFF key to power up your meter. All the LCD segments display
momentarily as the meter performs a self-diagnostic test, per shown in
section 2.2. The LCD then switches into measurement mode.
2. The LCD displays “oPEn” if the temperature sensor is faulty, or there is an
open circuit. Please refer to section on Troubleshooting if in doubt.
Vista de pagina 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Comentarios a estos manuales

Sin comentarios