EUTECH INSTRUMENTS ECOSCAN TEMP 456 TEMPERATURE METER Manual de instrucciones descargar pdf (Pagina 10)

2.7 Switching the Meter On

1. Press ON/OFF key to power up your meter. All the LCD segments display

momentarily as the meter performs a self-diagnostic test, per shown in

section 2.2. The LCD then switches into measurement mode.

2. The LCD displays “oPEn” if the temperature sensor is faulty, or there is an

open circuit. Please refer to section on Troubleshooting if in doubt.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Sin comentarios

EUTECH INSTRUMENTS ECOSCAN TEMP 456 TEMPERATURE METER Manual de instrucciones Pagina 10