EUTECH INSTRUMENTS CYBERSCAN PH 300310 PORTABLE METER Manual de instrucciones Pagina 17

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 52
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 16
14
4 MEASUREMENT
This meter is capable of taking measurements with automatic or manual temperature compensation.
Automatic temperature compensation only occurs when a temperature sensor is plugged into the
meter. If there is no temperature sensor plugged into the meter, the default manual temperature
setting is automatically 25 °C. You can manually set the temperature to match your working
conditions using a separate thermometer.
4.1 Automatic Temperature Compensation
For automatic temperature compensation (ATC) simply plug
the temperature probe into the meter (see page 6 for
directions). The ATC indicator will light up on the LCD. See
figure 13.
NOTE: If you are using a temperature probe, the
probe must be submersed in the liquid you
are measuring.
Figure 13 - ATC annunciator will light
up when connected to temperature
probe
Vista de pagina 16
1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 51 52

Comentarios a estos manuales

Sin comentarios