EUTECH INSTRUMENTS CYBERSCAN PH 300310 PORTABLE METER Manual de instrucciones Pagina 37

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 52
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 36
34
7.6 P5.0: Resetting to factory default settings
Available in pH 300 meter only
In the pH 300 meter, Program 5 lets you reset all
parameters to factory default settings. This clears all
calibration data, memory, and any other setup functions you
might have changed.
From measurement mode
1. Press SETUP key to enter Set Up mode.
2. Press the MI/ or MR/ keys to scroll through
su/jointfilesconvert/333898/bgroups until you view parameter P5.0.
3. Press the ENTER key to enter parameter P5.0. See
Figure 33.
4. Press the MI/ or MR/ keys to toggle between NO
and YES.
NO retains current settings
YES resets to factory default settings.
5. Press the ENTER key to confirm selection and to
return to the measurement mode. Otherwise press
CAL/MEAS key to return to measurement mode
without resetting to factory default.
Figure 33 - P5.0: Reset to factory
default values (pH 300 meter only)
Vista de pagina 36
1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 51 52

Comentarios a estos manuales

Sin comentarios