
26
7.3 P2.0: Viewing previous calibration data
This mode lets you recall previous calibration data, which
helps you know when to re-calibrate your meter. This is a
“view only” mode.
From measurement mode:
1. Press the SETUP key to enter Set up mode.
2. Press the MI/▲ or MR/▼ keys to scroll through
su/jointfilesconvert/333898/bgroups until you view parameter P2.0.
3. pH 300 meter only: Press the ENTER key repeatedly
to view previous calibration data. See Figure 24.
pH 310 meter only: Press the ENTER key repeatedly
to view previous calibration data. The meter will first
display the calibration point, and then display the date
and time of calibration. See Figure 25.
4. When you have scrolled through all calibration data,
you will automatically return to the su/jointfilesconvert/333898/bgroup menu.
Press CAL/MEAS key to return to measurement mode.
NOTES:
If there is no previous calibration data at a particular point, the primary display will show “ ----“.
Figure 24 - P2.0: View calibration
data
Figure 25 - Time/date appears on pH
310 meter display only
Comentarios a estos manuales