EUTECH INSTRUMENTS CYBERCOMM PRO FOR CYBERSCAN PH 2100 Guía de usuario descargar pdf (Pagina 10)

Instruction Manual CyberComm pH 1100/ 2100

3.2 Data Log Options (File)

See Figure 7.

a) Time between successive readings (1-3600 sec). Default is 10 sec.

Select the time lag preferred between each successful reading using the arrow keys.

b) Length of Time to Capture Data. Default is 0 min. (0= indefinitely, units = min)

Select the total length of time preferred to capture data using the arrow keys.

The data capture will automatically stop upon reaching the set amount of time.

Maximum default time is 10080 minutes (1 week).

Figure 7: Data Log Options

Click OK to exit and save settings. The screen will return to the Main Menu (Figure 5).

After matching the Communication Settings and setting the Data Log Options between your computer and

the pH 1100/ pH 2100 meter using CyberComm Pro, you can now capture data into your computer for

analysis and storage purposes.

3.3 Connect to Meter (File)

See Figure 10.

From the Main Menu, select Connect to Meter to start the link between your computer and the meter. The

complete main window the CyberComm Pro will start after connection to the meter:

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

Sin comentarios

EUTECH INSTRUMENTS CYBERCOMM PRO FOR CYBERSCAN PH 2100 Guía de usuario Pagina 10