EUTECH INSTRUMENTS WP PCD 650 Manual de instrucciones descargar pdf (Pagina 12)

Instruction Manual PCD 650

1.3 Inserting Batteries

The meter supports multi -power sources.

1. Four ‘AA’ size 1.5 V alkaline batteries (supplied) or,

2. 9V DC power adapter (Optional in some models).

Figure 3 : Battery compartment

1.3.1 Inserting batteries for the first time

1. Use a Phillips screw driver to remove four screws holding the battery cover.

2. Remove the battery cover.

3. Follow the polarity indicated in the battery compartment and insert the

batteries.

4. Replace the battery cover onto its original position using the four screws. Note

the ▲UP symbol marked on the cover.

5. The meter is ready to operate. Use ON (F4) key to switch on the meter. The

ON (F4) key has to be kept pressed until the display comes up.

6. Set the system date & time before you start operating the meter for the first

time. Refer ‘: System Settings - Page 2’ in page 77 for details on how to set

date & time.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 119 120

Sin comentarios

EUTECH INSTRUMENTS WP PCD 650 Manual de instrucciones Pagina 12